Tag Archives: Structural Steel

Blog

Advantages and Disadvantages of Structural Steel Fabrication

Structural Steel Fabrication is a complex process involving bending, cutting and designing of structures. Completion of the metal work requires expert hands as there is a lot fine workmanship needed to achieve the desired result. Structural steel fabrication is basically putting together pieces of steel which have pre-designed in the warehouse, hence it requires specific knowledge and experience to finish the work.

steel column manufacturing NY

Advantages of Structural Steel

  • It is strong and is a lifetime investment. It is an excellent material for construction as strength of steel is greater than its density which makes it the most preferred material.
  • It is versatile material and give enough room for design. It can be bent, molded, cut and shaped with ease. Processing is simpler on structural steel as it is an alloy.
  • When compared with different types of metal, it is cost-effective and value for money.
  • Since it is built off-site, reduces accidents and any kind of mishaps during the construction process. At the same time, wastage is also minimized.
  • Above all, structural steel can be recycled without losing its inherent qualities, which makes it a sustainable material.
  • It does not require much time to complete structural steel fabrication work. Work is accomplished within stipulated period of time, unless some changes have been incorporated at the last minute.

steel frame

Disadvantages of Structural Steel

  • If not processed properly, it can rust and crumble due to corrosion. It is very important to check if treatment has been done before beginning the fabrication work.
  • Both maintenance and the capital cost are high for structural steel.
  • There is a very high chance for crumbling of steel fabricated products if necessary steps are not taken to insure its longevity.
  • Steel is known for collapsing out of fatigue, so structures have to be stiffened properly by extra columns or as suggested by experts and engineers.
  • They need to be treated to stand tall and strong during fire and other natural calamities.

Structural steel has a huge market and metal manufacturers are bringing in use new technology for increasing the life and scope of structural steel fabrication work. The biggest advantage of the metal is it reduces carbon footprint, which is of top most importance at this point of our life and for saving the planet for future generations. Experts and engineers are continuously exploring its potential and making it stronger by the day. There are examples showing how structural steel has withstood time and is testimony to many stories of history.

Omni Steel Supply is a professional metal manufacturer and supplier. They deal in structural steel fabrication and for years delivering fabricated steel products to various industries. If you wish to know more and explore your ideas about construction, you can get in touch with them for a detailed information on how to work with structural steel which requires specialized knowledge. You can fill in the form below and one of us will get in touch with you with complete information related with your requirement.

Common Problems during Metal Plate Fabrication

Metal fabrication is a niche field and requires workmanship along with industry experience. Steel
fabrication as a process and a project is not an expensive thing, but resolution of even a small issue
can make the whole assignment costly and time-consuming. However, certain issues or if there is an
understanding of the subject, can be addressed upfront and avoided for the success of the end
product. Omni Steel Supply team has worked on several projects across the industry and some of the
real challenges which could have been pull-backs and could have increased the time-frame are—

• Communication—There are many tangible issues, but key to all is good communication
between the team members working on a project. Enterprise integration which is achievable
by seamless sharing of data about a project ensures success of each project in hand. When
experiences, work difficulties, project challenges, ideas, designs and client expectations are
shared with all the members, result is definitely going to be the best.
• Precision Planning—Project detailing, inclusive of workmanship for each stage is a nonnegotiable aspect. If planned to the core, it is easy to anticipate problems and it can be
handled before the issue really hits.

The above two problems are termed as stem issues, as they are the building blocks of any successful
and a quality end product. If a metal manufacturer is aware of these, half of the battle is won and
realization of the project within a given budget and time frame becomes a reality. Besides these, some
other problems that crop up during steel fabrication or customization could be,

• Scratches can be cause of concern, as external damage to metal sheet can lead to corrosion
and rust. This has to be avoided and should not be compromised in the process of reaching
the desired designs. Fabricators usually estimate such issues can take proper steps to protect
the sheet from any kind of external damages.
• Metal has strong flexibility and elasticity, sometimes it springs back after bending. Fabricators
ensure that a little more than the required needs to be done to achieve the required design
for the project. Bending, welding and punching are tricky process and should be handled with
utmost precision and diligence.
• Metal work is a game of temperature. The flow of heat varies with the type of metal and it
must be controlled in accordance to avoid any deformity. Metal fabrication is an art that
includes attention, detailing, planning and designing.
• Success of Structural Steel Fabrication projects is a lot dependent on the equipment. For
fabrication work, we need right type of equipment and workmanship to handle them. These
only can ensure clarity and high quality of the project.

Omni Steel Supply offers metal fabrication work in and around Jamaica, NY. With our extensive
knowledge about the field, we guarantee quality work. We are one stop shop for all your metal-related
work from inception to completion of the project. We even cater to remote orders. For more details,
you can reach out to us, by filling the website form in contact page.

Five benefits of Structural Steel in Construction

Structural Steel or fabricated steel has changed the construction landscape by bringing
novelty and futuristic style to any edifice or structure. The ease with which steel can be
fabricated increases its scope and utility. From commercial buildings to bridges to car bodies
to airplanes to residential complexes to interior decoration. It has shown its mettle quite
literally. The biggest boon of using steel for construction, it has distinguished endurance
towards natural calamities, which makes it dearer for manufacturers and architects.


Benefits of Structural Steel

1. Brings down construction cost: Since, steel comes prefabricated, it brings down
both time and overall cost involved in the construction process. Labor cost also
gets reduced, this definitely is a big plus point when considering steel for
construction.


2. Construction quality improves: With much of the intricate work required for
construction purposes done at the warehouse, quality of construction improves.
Before steel goes under hammer and nuts, the 3-D model of the design is
evaluated and discussed at several levels, this reduces the chance of errors and
gives the desired feel to the project. Even the steel manufacturers maintain the
quality and tries to achieve the perfect finish.


3. Safety: This is probably the greatest feature of steel. It is non-combustible, high
on strength, great endurance for natural calamities, termite and rust free; steel
becomes the instant favorite. It has all the traits required for construction. Even
the construction work is done in a controlled area, which reduces chances of
accidents.
4. Resilience: An interesting feature of buildings made out of steel is it does not
vibrate during movements, or machine works and make for peaceful living in
buildings. Repair and maintenance works are also not cumbersome or herculean.
They can withstand distortion or buckling even under heavy loads.

conservatory omni steel supply
5. Sustainable: Steel is sustainable and an eco-friendly material. It can be used as
many times as one wants. It will retain its initial qualities and would give the same
result everytime. It is not an exhaustible resource like wood, and it gives solid
foundation to any project. In all ways, steel is a remarkable material for
construction and a lot of work is undertaken and is even possible due to steel. It
has been in use since ages but in recent times, its popularity has multiplied,
making it the most desired material.

Omni Steel Supply is a professional manufacturer and dealer of steel and other metals. We
provide structural and fabricated steel. We have our own warehouse, where we mold, cut,
repair, and make the designs as per the requirement of a project. We even take remote orders
and have the finest transportation facility to anywhere in NY, Jamaica, Queens, and other neighboring
areas. If you have steel or aluminum or any other metal requirement, you can get in touch with us
for a detailed discussion. Our engineers and staff can guide you about steel and its alloy and help
you with the selection of the best material for your upcoming projects.

5 Incredible Services offered by Custom Metal Fabricator

Turning a small sheet of metal into a piece of importance and art, is the work of a metal fabricator.
With sustainability becoming the new norm of business as well as healthy living, products made out
of metal and metal works have grown in demand. Iron, steel and aluminum are fulfilling both the
commercial and residential requirements of construction and interior designs. Today, we have more
trained designers who have knowledge of working on high end software programs to digitally create
the design that is troubling the thoughts of the customers. Metal manufacturers are more organized,
know their customers and can fulfil demands. Let us evaluate the reasons why anyone should connect
with Custom Metal Fabricator.

weldable steel sheets
Custom Metal Fabricator

1. Provide Customized Services: Technology has progressed so much, that it has become quite
simple to provide customized services. Today, customers wish is fulfilled by manufacturers in
the most efficient manner. There are no delays and requirement to modify a design for
achieving a particular cut and design.
2. Offer both online & offline services: With pandemic, structure and module of business has
gone into a big transformation. Professional metal fabricators have adapted to the changes
and already dealing with both online and offline services.
3. Offers one dedicated person: A professional organization would always offer you one
representative, who would guide you and help you in reaching your goal in the most efficient
way possible.
4. Offers regular discounts: If you follow social media accounts of metal manufacturers like Omni
Steel Supply, realize you would they often update their account and announce about
upcoming offers and discounts. Like, recently Omni Steel Supply was offering Black Friday Sale
for their customers, which could have been used even for metal repair or for manufacturing
a completely new project.
5. Give Options: A metal fabricator, who has been in business for a very long time, understands
requirements for their customers. They offer options and suggestions, which could help their
clients in cutting cost and yet get the best product in the market.
Over the period of time, it has been realized, it is always recommended to connect with an
experienced metal fabricator. They can guide, have enough knowledge to mold and cast the metal to
give the perfect finish at the most reasonable price. They have right equipment to achieve the end
result while ensuring safety of their workers.

OMNI provides high-end steel rebar fabrication services like no other!

Omni Steel Supply offers customized metal fabrication in NY and the surrounding areas as Jamaica,
Queens and other places. With their state-of-art technology, they give the best services and finish
projects without any delay. They take both online and offline orders and always find a way to offercomme
discounts to their customers. They take both big and small projects and have clients both from the
commercial and residential areas.

If you are looking for a metal fabricator for your upcoming project
or want suggestions for how to use a piece of metal lying in your garage, then get in touch with us today. Fill up the form and we would come to your aid!

Breaking News 💥 Omni Steel Supply is now introducing top of the line Aluminum Welding services under the supervision of industry experts for your commercial and residential projects backed up with exquisite customer services to ensure your dreams are fulfilled.
For online and remote orders, reach out to us at 👇
+1 (718) 523-5400

Omni Steel services 

Fence and gate fabrication

Custom fencing NY

Steel Band Saw Cutting

Main Reasons for different types of Structural Columns

Leave a comment

The construction of a building or a house has many stories to share from the inception of the
idea to completion. Every phase requires detailed planning and decision-making. Some
aspects are a selection of area, space, contractor, designer, material, the purpose of each column
and beam, and many more. From time and again, through our blogs, Omni Steel Supply tries
to make a couple of these facets clear and easy to understand.
Today, we thought of highlighting the purpose of different types of Structural Columns and
Beams such as Lally Column, Post Column and others. Designers many times suggest
getting a column in a residence and this confuses residents a lot. For commercial buildings,
it does make sense to them but not for their houses.

LALLY COLUMN
Reasons for different types of Structural Columns could be—

● Shape of columns: This is the most talked about feature and often confuses our
clients. Now shape is the biggest decider when it comes down to columns.
Rectangular Columns, it is the most common one and is used excessively in
construction, particularly when the shape of the area is rectangular or square. Then,
there’s the Circular Column, its purpose and beauty can be gauged from historical
construction, where it not only supported the foundation but gave an elegant look to
the edifice. It has no edges, making movement easy. It is also used for construction
of bridges or elevated rail tracks. Other, significant ones are T-shaped, Y-shaped,
L-shaped and others. All these are typically selected on the basis of design of the
room or the building and purpose it is going to serve. Like L-shaped can give an
impressive feel to your boundary wall. There’s also Hexagonal shaped columns that
are vastly used for giving height to open areas with roofs, and are used for
auditoriums, conference rooms. A good quality steel column, changes the whole
ambience while adding strength and strong support to your construction.
● Column Load: A column selection is also dependent on the load that it has to take. A
strong and durable material and type would be required for shouldering heavy loads
as in case of bridges or commercial complexes, similarly an elegant, modern looking,
eco-friendly and durable column type can be used for carrying loads of small
independent houses. A talk with a good metal contractor would be a good decision
for selecting column type.
● Ventilation: Another interesting feature columns help in maintaining the temperature
of the area. It can balance the coldness and warmth of the area by adequate
circulation of the air.
● Post Construction: Usually, columns support foundation and are installed at the time
of construction of a building but there’s also something called floating column. These
are installed for extending your present construction for maybe getting an attic or for
dramatic pleasure for kids.

To get a better insight on the types and purpose of Structural Steel Columns and beams, get
in touch with Omni Steel Supply. We are professional metal contractors and can show you more.

Why opt for Structural Steel Columns & Beams?

1 Comment

Construction has got a new face and we are sure all of you must have noticed how structural
steel has become one of the indispensable construction materials. Through our blogs, we try
to share different facets of fabricated metals, to familiarise you with the constructive changes
coming in this industry. This time, we thought of sharing a few things about structural steel
columns & beams.


When we talk about constructing a building, discussion begins with an exhaustive list of
items required for it. Among many, two important elements of construction are beam and
columns, both complement each other and ensure good strength of a building whether
residential or commercial. After being in the industry for so long, we have witnessed a
sudden surge in interest for Lally Column Fabrication and other good quality steel columns in
NY.
About Steel Columns
Steel Columns have vertical structure and their main purpose is to carry the load of roof
slabs, support beams, foundations, and also used for bending moments close to
cross-section axes. The reason for choosing steel is they are strong, flexible and more
durable compared to other construction materials. More significantly, they can be reused,
making them an environmentally friendly construction material. Steel does not lose its basic
characteristics even after several uses. And, not to miss, they can be constructed much
faster. All these make steel a favourite material for construction purposes.
When you get in touch with a steel manufacturer, they will inform you, post column
fabrication in NY is not about any kind of steel, each column has certain classifications that
are relative to the conditions they would be exposed to. Classification of columns is directly
related to…
● Height of column
● Shape
● Material to be used for construction
● Slenderness
● Loading types
● Resistivity
As professional installers of steel columns in NY and adjoining areas, our experts
recommend columns based entirely on the purpose these are going to serve. They also
check on the distance of columns and the numbers required in consultation with the
architects and designers. Columns could be circular, L-shape, I-shape, Y-shape, Spiral
reinforced, Short reinforced, Square, Rectangular, Composite, Stub, Tied reinforced, Tension
columns and several other types.

POSTS, COLUMNS, DECKING SUPPORT, LALLY COLUMNS FABRICATION

Why is Structural Steel used in construction?

Leave a comment

We often get to hear structural steel is the new age material and is extensively used for construction purposes. But, what sets it apart and makes it the most desireable element. And, it has also been suggested it brings down the cost considerably. We, at the Omni Steel Supply, as your metal fabricator in NY and the areas in and around Queens and Jamaica, thought of sharing a couple of things which can bring clarity in the lives of those who are exploring ideas to cut construction costs during the recent Covid 19 pandemic.

structural steel NY
structural steel

Why Structural Steel?

Structural Steel is unique owing to its composition and shape. Both make it better material for construction and especially when customized metal is required for getting the desired look for your house or the commercial complex. Let us begin with the composition of structural steel and then we can move to its shape which sets it apart.

Composition: Structural Steel has almost 2.1 percent of carbon content by weight. Now, what does this imply? It is regarded after iron, carbon is the most important element in steel in respect to its strength and ductility. So, this means as the content of carbon increases, so does its strength and lowers ductility. Depending upon the purpose of use, carbon content can be increased or decreased.

 

Yes, there might be a confusion on what should be the content of carbon for the structural steel required by you. We often face this query and to be honest, our experts feel, unless a client gets in touch with us and shares construction ideas or requirements, it is a little difficult to make suggestions. Omni Steel Supply professionals feel, each serves a different purpose and it is always the best move to talk to a client and refrain from giving generic suggestions, which can misfire and act like prophecies rather than being an informed help.

 

Shape: Structural Steel comes in various shapes, which shapes. This is the most attractive feature of the metal as it can be given the desired turn and twists based on the construction needs. It comes in I-shape, z-shape, L-shaped angle in cross section, then T-shaped cross-section, rod and bar. With so many options, working becomes easy and can be used for corners, specific areas, ornamental metal fabrication, for beams, Columns, edges, spiral staircase, lamps, tables, corner shelves, bookcase and many more.

The thickness and size of shape can also be fabricated and obtained as per the construction requirement. There are so many options available that working surely makes a pleasure both for the client and the metal fabricator.

How to get the help for Structural Steel?

If you wish to discuss Structural Steel and how it can ease your construction purpose, and make it smooth for you and the fabricator, you can get in touch with the professionals of Omni Steel Supply. We have been in this industry for a very long time and manufacture and design steel as per a client’s project.

Is Structural Steel better for construction?

Leave a comment

Steel has several categories and each serves a specific purpose. For most of the construction work, the profile of the structural steel makes it the best bet. A good metal fabricator would always recommend it for all types of construction projects irrespective of the magnitude of the work. It has different angles and shapes, which makes work very easy and forms a strong foundation. Structural steel is essentially carbon steel with just the accurate composition, making it both strong and ductile, meaning getting the desired shape becomes easier for a metal fabricator.

One thing that sets it apart from the other types of steel is the shape of structural steel. It is in cross-section and comes as I, Z, T, Bar and many other types of cross-sections. Your metal contractor in NY Jamaica can give you an overview and help in the selection, that is based on the type of construction we are considering.

5 reasons for choosing Structural Steel

  1. Shape: The foremost is the shape, it gives more room for designing and constructing the frame as per the specification of a particular project. Each shape has its own manufacturing advantages, which makes it the much-liked steel type. Of course when working with a qualified and licensed contractor, they can guide you about the purpose of each shape and can help save money.
  2. Versatility: Structural Steel is versatile in the sense that it gives ease of work. Designing gets much simpler and we can match the nuances required. It’s versatility is particularly visible when we are looking for ornamental fences or gates or maybe when we want a spiral stairway. So much can be achieved without any difficulty.
  3. Strength: Carbon is next after iron in strength and the correct composition of carbon in Structural Steel, makes it a good quality material for building construction. It gives a strong frame for big commercial projects and is regarded as the best option for any type of small projects.
  4. Easy Time Management: Advantage of prefabrication of steel frames at the warehouse, makes for easy time management. All the designing work is offsite, the only on-site job is installation of the frames. This reduces a lot of on-site work and speeds up the entire project. This also ensures job safety for the workers who are involved in the completed work as very little is left for the final outlay.
  5. Sustainability: Steel of any type is an eco-friendly material and most of the steelwork is from recycled steel material. This reduces carbon footprint considerably and contributes towards greener earth. It has a long life and stays intact for years on stretch with minimum maintenance involved.

Structural Steel has a lot more benefits which can be discussed at length with your domestic metal contractor. If you have any queries related to steel, you can give us a call today or simply fill up the form below. Omni Steel Supply experts have answers to all your doubts and can simplify work for you.

Our domestic or commercial welding services include on-site welding and fabrication for aluminum, steel and stainless steel. We also do repair and maintenance work and attend to any emergency service on the same day of wear and tear. OMNI Steel is known for quick and fast delivery of services. Our project heads value time and money, andwe deliver at the committed time. Contact us for more details.

 

Pros and Cons of Structural Steel Fabrication

Leave a comment

The below piece is an attempt to guide you through the benefits and disadvantages of structural steel fabrication. Being in the industry for a considerable period of time, Omni Steel has tackled many concerns and issues related with steel fabrication services NY and tried to work it out. Here, we are enlisting a few advantages and disadvantages which would help you in decision making and give you an idea while discussing with your interior designers about custom metal fabrication in New York.

Structural steel fabrication

Pros

  1. Cost Effective: Compared to other construction materials like wood, it fits into the budget when overall pricing and purpose is considered. It holds strong and is futuristic. With proper care, it can stand strong for more than 30 years.
  2. Fire Resistant: It is considered non-combustible material when face to face comparison is drawn with structures made out of wood.
  3. Flexibility: Steel fabrication gives a lot of choice and enough space to designers to showcase their creativity.
  4. Easy delivery: Since work is essentially done in the factory, the end product is delivered on time and with ease. Only fastening with bolts and nuts is done on site.
  5. Strength: Steel can endure outside force as earthquakes, cyclones etc.
  6. Designing Ease: Designing of steel frames is done on computers, especially if it is a customised work. So, even if last minute changes have to be brought in before finalizing the design, it can be done and can be evaluated.
metal bending
metal bending

Contact Omni Steel supply for Post/Columns Fabrication, Post Supports, Metal Deck support and Lally columns. For more information read here  Steel Column manufacturing

Cons

  1. Higher Maintenance: Steel has a long life, but it requires regular maintenance to protect it from rusting.
  2. Complicated Moderation: Steel fabrication is done in the factory. Nothing is done on-site, so it’s difficult to bring any last minute change. Specifications and designing need to be finalized before the actual work begins.
  3. Transportation: As construction work is done in the factory, it might be cumbersome to transport the whole piece.
  4. Requires fireproofing: In Spite of the fact that it is fire-resistant, it requires extra fire proofing as it is a good conductor of heat. And has to properly secured by the steel fabricator who are experts in the area.
  5. Error in Fabrication: It is certainly a challenge, steel fabrication services should always be availed by seasoned craftsman. It requires a lot of patience and proper way of working before delivering the final work as designing errors can’t be rectified easily and the whole thing would need to be replaced.
  6. Buckling: Due to overexposure to weather conditions, steel frames tend to buckle and collapse. There’s a variation in the tensile strength of steel which should be checked in accordance with the purpose of usage.

Omni Steel has always answered these challenges with great ease and finesse. Our professional team of designers, technicians brief both the client and the designers about the strength and type of steel before starting the work. If you are considering steel fabrication either for your home or office, then give us a call today or fill up the form and one of our executives will get in touch with you.  Call us at 718.523.5400

Check links to know more about

Structural Steel Beams and Columns NY

Custom Metal Fabrication NY