Archives

Features of High-Quality Steel Tubing

Steel tubes and pipes are essentially used for infrastructure and construction purposes. And, tubes
and pipes are commonly confused words, and many times used interchangeably even by people who
have been working with them for ages. To get high-quality steel tubing for your next project, it is better
to get an idea about the two and what is the basic difference between the two words. For start, pipes
are mostly round, whereas tubes can be circular, rectangular or square tubes. Another, very basic but a
significant difference is tubes are smaller than pipes and their diameter goes till 5 inches, though they
can be modified as per usage and specification of the project. Tubes are considered material with
greater strength than pipes.

For tubes, thickness is an important aspect and determines the quality of the steel tubing. The strength
of the steel is directly proportional to its thickness, so based on the requirement of the project, a steel
tube of 6×6 or 1-1/4 x 1-1/4 or 2-1/2 x 2-1/, can be used. Usually, for selection of perfect tube, expert
advice is taken. Even the manufacturer of steel end products can guide you through the quality of
steel tubing.

steel tubes and pipes

Unlike steel pipes, tubes can be both hot and cold rolled and they can also be galvanized. Steel tubing
is preferred as experts consider they are of telescoping abilities. This implies, that they are preferred
choice for wider range of application for different projects.
Since, steel tubes have wide use in industry that works on precision as medical tools, quality check
makes it mandatory. Though tubes are threaded and can be connected faster, their surface
treatment entirely depends on the purpose of use and then they either go with special polish or sour
cleaning. Also, it is important to understand about the size and dimension as it is a determinant
factor when it comes down to selecting a perfect tube for a project. Tubes are measured with the
use of exact outside diameter (OD). So, before picking a tube of 1-3/4 x 1-3/4 or 3/4 x 3/4 or 1×1, we
must have a clear knowledge and understanding about the work. For deeper insight and for perfect
choice, help of manufacturer can be sought. They make it really simple and clear for a common man
who has set to purchase high quality steel tubing.
Tubes preferably comes handy for structural purposes like parts for industrial usage, cooler or heat
exchanger tubes, weapon parts and more. There are lots of usage of steel tubing and this is the basic
reason why it is available in different dimensions as 3×1, 3×2, 3×3, 4×2, 4×4 and more.

Omni Steel Supply are professional dealer of steel tubing and pipes, we also cater to remote orders
and have seamless transportation and installation service. If you are in need of high-quality steel
tubes or pipes and need information as well. Connect with us today, by filling the form below. We
are waiting!

For online and remote orders, reach out to us at 👇
+1 (718) 523-5400 

Steel pipe vs. steel tube: What is the difference?

Leave a comment

Whether you are considering using a steel pipe or looking for steel tube, we would like to mention, the only similarity between them is, they are made out of steel and that makes them robust and durable. Now, this is the only likeness, so they cannot swap places and interchange each other’sutility. For maximum return on investment and for longevity, make the correct choice while going for any of them. But for that, you need to understand the basic difference between the two for making an informed and intelligent choice.

Steel Tube

Steel Tubes can be made in any shape square, rectangular or circular and this is one of the reasons, why it is extensively used for structural purposes. It has extensive usage in applications ranging from heating to plumbing to highway engineering works. Steel tubes are also used in the automobile industry and for medical purposes as in heart valves or surgical implants and more.

Steel tubes can be made out several kinds of raw materials as aluminum, copper, or brass but if you are looking for a tube that is sturdy, strong and value for money, then there is no alternative to steel tube online NYC.

Quality steel Pipes
Steel Pipes, Square & Rectangular Tubes

 

Steel Tubes are used for multiple purposes and that is why it is mandatory to understand the importance of “outside diameter” of either Steel square tube NYC or rectangular tube NY. This essentially means the distance that is between the opposite ends of the exterior of the tubes.

The reason that makes steel tubes structurally all-encompassing, because tubes are attached to one other via simple couplings and makes them really hard and tough.

Steel tubes are regarded as inherently stronger, that is to say, they have better overall performance in applications where durability and strength is in question. It shows great results where diameters of smaller size are required.

Steel Pipe

Quality Steel Pipes in New York
Quality Steel Pipes in New York

 

If you are gearing up for shop Steel Pipe online New York, then you must realise that steel pipes are invariably round in shape and are not available in other shapes. They are largely used as vessels, that is required to move things as gases or fluids from one place to other.

With steel pipes, it is the “inside diameter” which is important and must be taken into consideration while placing an order. It is the distance of the two points that lie at the opposite ends, of the pipe’s hollow center. The depth of the inside diameter varies as per the need of a particular job. It is used for larger applications.

Steel Square Tube NYC
Steel Square Tube NYC

Making a decision

Working with steel tube or steel pipes is an important decision. One cannot replace the other and surely there are different dimensions to be considered, when shopping for steel tubes or pipes online in New York or elsewhere.

Each size and thickness hold an importance, a judicious choice has to be made for the work at hand. Where tubing is majorly a part of the structural work, pipes holds value when vessels are needed and fluid has to be transported.

Why Omni Steel?

Omni Steel deal with all kinds of steel tubing and pipes, if you are looking for them and not sure about the measurements, then contact us today. Our experts can guide you and help you with making an informed and right decision.

5 Smart Ways to Select Steel Sheet

Leave a comment


Steel is widely used metal for manufacturing purposes. But, how to choose the best type of steel and how much alloying is required for the work that you need to accomplish? There are different gradations for steel and choice should be made based on our requirement. Here, we list 5 smart ways which can provide for the best selection of stainless steel, tool steel, galvanized steel, or engineering steel.

How to Select Steel?

Five things that we need to consider for our selection is durable, toughness, weldability, strength and ductility.

1. Durable: Steel is a hardened metal and is the most popular element due to its durability. But, at times you need to consider it with regard to the purpose for which it is required. Durability varies with gradation of steel and can be increased by alloying. If you are looking for steel planter, which is exposed to water and humidity, then definitely you need steel that has a high resistance to corrosion.

Durable Steel Sheets
Durable Steel Sheets

2. Toughness: Now, if you need steel pipes for transferring water or for construction purpose, then surely toughness is the call of the day. Our requirement will be really hard steel, that can withstand all types of wear and tear and stay tough.

3. Weldability: Mostly all types of steel are weldable, yet we need to check alloying for various usage. As welding can also reduce the toughness of the steel, so we need to make an informed choice after proper discussion with the right metal supply in NY.

weldable steel sheets
weldable steel sheets

4. Strength: Another aspect to look for is the strength of the steel. Suppose, we need for steel wine rack, then surely, we need a good quality steel, which can hold things without falling and even has appealing look and feel to it.

Quality steel Pipes
Quality steel Pipes

5. Ductility:Alloy is the main factor and we need to understand it, if we are looking for steel that has high ductility for steel wedge or something similar to that.
Longevity, durability and cost effectiveness are the three things, one can identify with steel. We provide carbon steel plates of different width, size and cost. Most of the items that we supply are listed on our website, but, if you are looking for something beyond this, you can approach us and we can supply that to you. We give the most competitive market price and take guarantee for the work that we do. For quality and best steel sheet or plates online in New York services, you can rely on us.

How to make the correct choice?

Engineering steel comes in various grades and the gradation is essentially subject to alloying properties like if sulphur content is reduced, then ductility can be increased. So, we have to understand how much we have to bent plate and for what purpose, the small knowledge can go a long way in making the right decision regarding steel.

A few more things that we can bring into consideration while making a choice are—
• Is steel corrosion resistance
• Is steel required for machined
• Is steel needed for heat treatment
• Does steel need good formability
• Application
The above can help further in selecting the right type of steel and can give a good return on investment.

Why choose Omni Steel?

At Omni Steel Supply, we deal with wide range of steel and aluminum items. You can rely on us for your supply of good quality metal in New York and US. We have consumers across the country and been in business for a very long time. We have a great web presence and can guide you about the right type of steel for your end usage in no time. Most affordable and reliable steel and aluminum company in Jamaica, New York.

 

 

Steel Plates and their Usage – Omni Steel Supply

Steel plates can be manufactured by large steel factories or smaller, and they have a lot of interesting usages. Steel plates are one of the many types of steel that can be produced to other types including bars, sheets, slabs, rolls, and many other elements. They are often used for structures and constructions, household goods, marine and offshore equipment. Here are some of those usages explained.

Structures & Construction

Steel Plates can be used on many construction needs, because they can be folded and cut to any size. Steel can be combined with other metals to form all types of shapes. In Omni Steel Supply you can order steel plate, and make a custom cut depends on your needs.

Household Goods

Many people use steel to accomplish their ideas. Plates can be used for designing awesome things for your home, such as stair pans , dinner tables and fences . Also can be used for making cool name plate designs for you to put it in front of your door, or gate. In our company, you can order the steel plate, and we can cut on all shapes and deliver it to you.

steel plates Jamaica, Queens, NY
steel plates online

Military Needs

Steel industries with military contracts, deliver steel plates to the Department of Defense and its other departments such as the Army, Air Force and Navy. Military steel plates are used for tanks, jeeps, trucks and ground vehicles, helicopters, jets and other aircraft. The Navy uses this steel for shipbuilding and naval repair.

 

Here are some of the usages for Steel Plate. What is your favorite?
Please if you liked this blog share it, and if you have any questions about steel feel free to comment.  If you are interested for buying steel, we are available, so you can contact us anytime.